Rapid RH25L, Инструкция по установке и эксплуатации

Страница: 5 / 73

3
Parameters of product range
Specification
Series / Model
PH /
RH(C)25L
PH /
RH(C)35L
PH /
RH(C)50L
PH /
RX(C)60Ls
PH /
RX(C)65Ls
PH /
RX(C)80Ls
Fu
nc
tio
n
Heating capacity
kW(air 2
6 ℃
, water 26
℃
)
10 13.5 17.5 25 28 33
C.O.P. (air26 ℃ ,water26 ℃ ) 6.6 7 6.7 6.92 6.8 6.8
Heating capacity kW
(air 15 ℃ ,water 26 ℃ )
6.6 9.9 11.4 15.9 16.3 22.2
C.O.P. (air 15
℃
,water26
℃
) 4.64 4.78 4.68 4.71 4.94 5.16
Cooling capacity kW
(air 35 ℃ ,water 28 ℃ )
6 8 10 15 16 20
C.O.P. (air35 ℃ ,water28 ℃ ) 4 4 3.8 4.2 4.2 4
Power supply 230-240V/1Ph/50Hz 380-415V/3Ph/50Hz
Rated Input power kW 1.4 2.1 2.4 3.4 3.3 4.3
Rated Input current A 6.5 9.5 11.4 5.5 7.3 9.2
Advised water flux m³/h 4-6 5-7 6.5-8.5
7-9
8-10 10-12
Water pipe in-out spec mm 50 50 50
50
50 50
Net weight / Gross weight Kg 60/69 70/79 73/82
105/117 121/136 123/138
*C.O.P: Coefficient of performance
Note:
1. Mode RH/RX~ is heating only, RHC/RXC is heating and cooling optional. For heating only, please ignore the
parameters of cooling capacity and cooling C.O.P, other parameters are the same with the heating and cooling type
2. This product can work well under air temp +0 ℃ ~43
℃
. Performance cannot be guaranteed outside the
operating ranges and must take account the exterior conditions of use identified to select suitable mode
(such as location, volume of swimming pool, and numbers of swimmer.)
3. Above parameters are subjected to adjustment periodically for technical improvement with further notice.
Please refer to nameplate on each machine for accurate information.