Rapid RH25L, Инструкция по установке и эксплуатации

Страница: 17 / 73

15
1 EE 1 High pressure protection of refrigerant Contact your dealer.
2 EE 2
Low pressure protection
of
refrigerant
Contact your dealer.
3 EE 3 Low water pressure protection
1. Check if there is no water
through the machine; make
sure the pump is on.
2. Or contact your dealer.
4 EE 4
A.Single phase machine : failure
connection due to loose wire terminal of
PROT2 on the PC board
B.Three phase machine : 3 phase
sequence protection
Contact your dealer.
5 PP 1 Pool water temp sensor failure Contact your dealer.
6 PP 2
a. Heat only type : Exhaust temp sensor
failure
b. Heat and cool type: Cooling coil pipe
temp sensor failure
Contact your dealer.
7 PP 3 Heating coil pipe temp sensor failure Contact your dealer.
8 PP 4 Gas return temp sensor Contact your dealer.
9 PP 5 Air temp sensor Contact your dealer.
10 PP 6 Compressor exhaust overload protection Contact your dealer.
11 PP 7
When the temperature ＜ 0
℃
,auto stop
for protection (Not Failure )
Machine Auto-protection
12
EE8/888
/Messy
Code
Communication Failures Contact your dealer.