Rapid DZP 20-Z Скачать руководство пользователя страница 3

2. General advice

    Don‘t let the DZP 20-Z unattended during dispensing and remove possible pollutions according to 
    local regulations to prevent accidents.

3. Technical data

The liquids compatible with auto shott off digital nozzle must be a low viscosity bamely as below

Use of other fluids may be inaccurate and can damage the nozzle
Not suitable when used in a retail sale of diesel, oil or kerosene !

4. Description

LCD-Display
The LCD of the meter features two numerival registers and various indications displayed to the user 
only when the applicable function so requires.

Key
 

  Partial register (5 figures with moving comma from 0.1 to 99999) indicating the volume 

 

      dispensed since the reset button was last pressed

 

 

Indication of battery charge

 

 

Indication of calibration mode

 

  Indication of resetting present total to zero

 

  Total register

 

 

Indication of flow rate mode

 

 

Indication of unit of measurement of partial :

 

 

L = Litres

 

 

GAL = Gallons

 

 

PT = Pints

 

 

QT = Quarts

User buttons
The turbine digital meter features two buttons (MENU and RESET) wich individually perfprm two 
main functions and together, other secondary functions.
The main functions perfomed are:
For the reset key, resettung the partial register and reset table total  (reset total)
For the menu kea, entering instrument calibration mode.
used together , the two keys permit entering configuration mode.

Battery replacement
When replacing the battery, please open the cover, remove the plug and replace the battery.

5. Assembling / Installation

1 Connect the nozzle directly with the delivery hose. Please be ensure the thread is sealed.
2 Turn on the dispenser, open the trigger of nozzle to start dispensing. For first time using, it is necessary 

to turn the trigger on and off 2-3 times to discharge the air inside.

3 After dispensing, turn off the nozzle and take back to the nozzle holder.

Modell no.

DZP 20-Z

Accuracy

5-Digit present total (0,01 ~ 999,99)

Flow rate

up to 60 LPM / 16 GPM

Fluid type

Diesel & kerosene

Units

Einheit (Liter, Gallonen, Pint, Quarts)

Screen

7-Digit non-resettable total (1~9999999)

Pressure (max) 50psi/3,5bar

Inlet and outlet

3/4"

Tolerance

±1%

Weight

1,3kg

Temperature

-10°C bis +50°C

Power supply

2xAAA

+49 (6158) 92980-0

3

Содержание DZP 20-Z









Отзывы: