Rapid Shape D30+, Оригинальная инструкция по эксплуатации

Страница: 24 / 44

Operating instructions D30+
│
P30+
│
SheraPrint 30
Rapid Shape GmbH
│
DOCR000231 24
│
44
Figure 4 : ‚Select Job’
7.4 More Functions
In the menu level 'More Functions' (
→
Figure 5) you can carry out the
automatic reservoir cleaning (removal of hardened particles at the
bottom of the reservoir).
1. Main menu: Change directly to the menu level by pressing the
'More Functions' button.
2. Press the 'Clean Reservoir' button to start the reservoir cleaning.
→
Chapter 10.2.5
Figure 5 : ‚More Functions’
7.5 Calibration
In the menu level 'Calibration' you can calibrate the exposure unit of
the machine. (
→
Figure 6)
1. Main menu: Change directly to the menu level by pressing the
'Calibration' button.
2. Perform the calibration according to the instructions in this
manual and the instructions on the machine.