Operating instructions D30+
│
P30+
│
SheraPrint 30
11
│
44
Rapid Shape GmbH
│
DOCR000231
1.5.5
Danger of material damage
Overheating
NOTE!
Material damage due to overheating!
Too high ambient temperatures and a disabled air outlet
may overheat the overall system.
—
The air outlet must never be covered.
—
Maintain the specified ambient temperature
(
→
Chapter 12.1).
—
Never install the machine in a closed cabinet.
—
Keep a minimum distance of 20 cm behind the
machine so that the heat generated can be
dissipated without hindrance.
Environmental conditions
NOTE!
Material damage due to environmental conditions!
Separate environmental conditions may result in property
damage to the machine.
—
Protect the machine from moisture, dripping water
and splashing water.
—
Protect the machine from dust in excessive
quantities.
—
Protect the machine from heat and direct sunlight.
—
Keep open flames away from the machine.
—
Do not place objects filled with liquids
(such as drinks) in the immediate vicinity of the
machine.
1.6
Personnel requirements
WARNING!
Risk of injury in case of inadequate qualification
of personnel!
If unqualified personnel carry out work on the machine,
dangers arise which can cause injuries and material
damage.
—
All activities must be carried out by qualified
personnel only.
The following are the required qualifications of the personnel to work
with the machine:
Operator
The operator is the person who operates the equipment for commercial
or economic purposes or loans it to a third party for operation and
bears legal product responsibility during the operation for the
protection of the user, the personnel or third parties.
The operator has been trained by the manufacturer in handling the
machine and the necessary accessories and can recognise possible
dangers independently and avoid hazards.
