Ransomes MT383, Инструкция по безопасности, эксплуатации и техническому обслуживанию/Список запасных частей

Страница: 71 / 120

en-71
MAINTENANCE AND LUBRICATION 8
8.1 MAINTENANCE & LUBRICATION CHART _________________________________
GENERAL MAINTENANCE AND LUBRICATION CHART
Interval Item Section
First 50 hours
 Change Hydraulic Charge Filter Element or earlier if screen
indicates.
8.5
Daily
10 hours

Visual inspection for damage or wear
 Check cylinder & bottom blade condition

Check pivot points, Lift arms, Rear Axle. Grease if required.
 Check Safety Interlock System.

Check Hydraulic Fluid Level
 Check Tyre Pressure

Check Engine Bay & Cooling System for Debris
-
9.3
8.1
7.2
8.5
4.3
8.1
Weekly
Every 50
hours

Check for Loose Components.
 Check for Hydraulic Leaks.

Lubricate Cutting Unit grease points.
-
-
8.2.2
End of
season
Every 1000
hours

Check Battery Condition.
 Change Hydraulic Oil & Filter

Check Hydraulic hoses for damage and wear
8.11
8.8
-
Lubricate these fittings minimum weekly or more if use and conditions require.
A
= Centre Arm Pivot
B
= Front Lift Arm Pivots
C
= Cutting unit Mounting Pivot
D = Bearing Housing Lubrication E = Roller Lubrication
FLUID REQUIREMENTS
Description Quantity Type
Engine Oil (with filter) 7 litres 10W 30 (See specification below)
Hydraulic Oil (with filter) 52 litres ISO VG 46
Radiator Coolant 7.8 litres 50% Anti-Freeze
Fuel 77 litres EN590 (ASTM D975) Ultra Low Sulfur
Diesel / (No.2 DULS)
Grease As required Shell Gadus 2 or equivalent
ENGINE OIL: MUST BE TO A.P.I. CLASSIFICATION CJ-4 GRADE.
Temperature Viscosity
Above 25°C (77°F) SAE30 or SAE10W-30 or 15W-40
0°C to 25°C (32°F to 77°F) SAE10W-30 or 15W-40
Below 0°C (32°F) SAE10W-30