Ransomes MT383, Инструкция по безопасности, эксплуатации и техническому обслуживанию/Список запасных частей

Страница: 52 / 120

en-52
6 CONTROLS
6.6.14 EMISSION FAULT – EGR NO
X
CONTROL
_____________________________
When this screen is shown, the engine controller (ECU) is reporting a
fault with EGR system or sensor.
The output from the engine will be
reduced.
Stop the engine as soon as possible and contact your local
Ransomes Jacobsen Dealer.
6.6.15 EMISSION FAULT – MAF SENSOR __________________________________
When this screen is shown, the engine controller (ECU) is reporting a
fault with the MAF (Mass Air Flow)
sensor. The output from the engine
will be reduced. Stop the engine as soon as possible and contact your lo -
cal Ransomes Jacobsen Dealer.
6.6.16 EMISSION FAULT – DPF SENSOR __________________________________
When this screen is shown, the engine controller (ECU) is reporting a
fault with the DPF (Diesel Particulate Filter). Stop the engine as soon as
possible and contact your local Ransomes Jacobsen Dealer.
6.6.17 CLEAN DPF ASH ________________________________________________
When this screen is shown, the engine controller (ECU) is reporting that
the level of ash in the DPF (Diesel Particulate Filter) is in excess of 95%
and therefore the DPF needs to be serviced. Contact your local
Ransomes Jacobsen Dealer for information on the procedure for
servicing the DPF.
1/1
EGR
NOx
1/1
MAF
SENSOR
1/1
DPF
SENSOR
1/1
>95%