Ransomes 51 Super Certes, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 27 / 128

en-27
6 CONTROLS
6.1 OPERATOR PRESENCE CONTROL - MECHANICAL (OPC)__________________
The OPC control is on the right-side handle bar. To
operate, press the button [B) and pull the lever [A] to
engage the drive. To disengage the OPC, release lever
[A]. Button [B] will spring into position and prevent the
operation of Lever [A]. Forward drive will stop.
6.2 LANDROLL CLUTCH _________________________________________________
This control is on the left-side of the handle bar. To oper-
ate, pull the lever [C] the clutch is disengaged. When the
landroll clutch is disengaged, the machine can be moved
manually.
6.3 THROTTLE CONTROL ________________________________________________
To change the cutting speed, use the hand lever [E].To
increase the engine turns, move the hand lever [E] down.
To decrease the engine turns, return the hand lever [E] to
the Low Idle position
.
A
B
C
D
E