Ransburg Vector AA90 79580, Руководство по обслуживанию

Страница: 53 / 88

AH-07-01.8
Vector AA90 Applicators - Operation
4 8 4 8
4 8 4 8
4 8
Applicator Switch Lockout Applicator Switch Lockout
Applicator Switch Lockout Applicator Switch Lockout Applicator Switch Lockout
The applicator switch may be de-activated for
applications that require the operator to not be able
to change settings or turn the applicator off at the
applicator.
1. Turn AC power off and access the interior of
the control unit.
2. Place the jumper across the two (2) pins at
location 15 on the main PC board (see Figure 29).
3. Close the control unit and turn AC power back
on. It will now be no longer possible to change
setpoints or turn kV off at the applicator.
Overload Activation Overload Activation
Overload Activation Overload Activation
Overload Activation
The overload circuit may be activated for
applications that require notification of high
applicator output currents. The overload value is
set in the software and is maximum microamp
rating minus 10 microamps.
1. Turn AC power off and access the interior of the
control unit.
2. Place the jumper across the two (2) pins at
location 17 on the main PC board (see Figure 30).
Figure 29: Jumper Location - Applicator Figure 29: Jumper Location - Applicator
Figure 29: Jumper Location - Applicator Figure 29: Jumper Location - Applicator
Figure 29: Jumper Location - Applicator
Switch Lockout Switch Lockout
Switch Lockout Switch Lockout
Switch Lockout
Figure 30: Jumper Location - Figure 30: Jumper Location -
Figure 30: Jumper Location - Figure 30: Jumper Location -
Figure 30: Jumper Location -
Overload Activation Overload Activation
Overload Activation Overload Activation
Overload Activation
3. Close the control unit and turn the AC power
back on. An overload fault will now occur if the
microamp display comes within 10 microamps of
the maximum current.