CAUTION
!
WA R N I N G
!
NOTE
SAFETY PRECAUTIONS
Before operating, maintaining or servicing any Ransburg
electrostatic coating system, read and understand all of the
technical and safety literature for your Ransburg products.
This manual contains information that is important for you
to know and understand. This information relates to
USER
SAFETY
and
PREVENTING EQUIPMENT PROBLEMS
.
To help you recognize this information, we use the following
symbols. Please pay particular attention to these sections.
A WARNING! states information to alert you to
a situation that might cause serious injury if
instructions are not followed.
A CAUTION! states information that tells how to
prevent damage to equipment or how to avoid a
situation that might cause minor injury.
A NOTE is information relevant to the procedure
in progress.
While this manual lists standard specifications and service
procedures, some minor deviations may be found between
this literature and your equipment. Differences in local codes
and plant requirements, material delivery requirements, etc.,
make such variations inevitable. Compare this manual with
your system installation drawings and appropriate Ransburg
equipment manuals to reconcile such differences.
Careful study and continued use of this manual will provide a
better understanding of the equipment and process, resulting
in more efficient operation, longer trouble-free service and
faster, easier troubleshooting. If you do not have the manuals
and safety literature for your Ransburg system, contact your
local Ransburg representative or Ransburg.
WA R N I N G
!
WA R N I N G
!
The user
MUST
read and be familiar with the
Safety Section in this manual and the Ransburg
safety literature therein identified.
This equipment is intended to be used by
trained personnel
ONLY
.
This manual
MUST
be read and thoroughly un-
derstood by
ALL
personnel who operate, clean or
maintain this equipment! Special care should be tak-
en to ensure that the
WARNINGS
and safety require-
ments for operating and servicing the equipment are
followed. The user should be aware of and adhere
to
ALL
local building and fire codes and ordinances
as well as
NFPA-33 AND EN 50176 SAFETY STAN-
DARDS, LATEST EDITION
, or applicable country
safety standards, prior to installing, operating, and/or
servicing this equipment.
The hazards shown on the following pages may
occur during the normal use of this equipment. Please
read the hazard chart beginning on page 2.
SAFETY
LN-9223-00-R12 (04/2018)
4 / 22
www.carlisleft.com
SAFETY
EN
