14
Brief function descriptions
Sectioning/ Trimming Switch (C/T): switch between sectioning and trimming.
Memory 1 (M1): Press to return to the saved position. Hold (M1) to set the first position.
Memory 2 (M2): Press to return to the saved position. Hold (M1) to set the second position.
Decrease key (-): Reduce the sectioning thickness value (hold for rapid decrease)
Increase Key (+): Increase the sectioning thickness value (hold for rapid increase)
Setup Key (SET): Press to open the option menu for sectioning thickness, trimming thickness,
retraction distance, interval range, selection of precise/fine trimming and buzzer prompt, and small
handwheel course feed direction. Hold to cyclically switch between three modes (SMART MODE,
FULL MODE, STANDARD MODE).
6.3 Operation Procedures
1. Hold
the “SET” key to switch between the following three modes: FULL MODE, STANDARD MODE,
and SMART MODE (See Page 14 for detailed descriptions).
2. C
lick the “SET” key to enter the following setting interface:
3. Short click the “SET” key to enter different items and press the “+” or “–” keys to set up the following
items: section thickness, trimming thickness, retraction distance, interval range, selection of fine
trimming and buzzer prompt, and small handwheel course feed direction.
Regarding selection of fine trimming and buzzer prompt, four options are displayed on the screen and can
be selected by pressing the “+” or “–” keys:
No fine trimming; with buzzer prompt
Fine trimming; with buzzer prompt
Fine trimming; no buzzer prompt
No fine trimming; no buzzer prompt
