12
5.4 Assembling the blade holder and base
Do not insert the disposable blade when the blade holder is not firmly installed! ALWAYS
remove the disposable blade before replacing the blade holder.
Steps:
1. Turn the
lateral movement lever (4)
counterclockwise to assemble the
blade holder top (6)
onto
the
segment arc (10)
, which is then locked by turning the
lateral movement lever (4)
clockwise.
2. Use an Allen wrench to loosen the
segment arc screw (9)
and assemble the
segment arc (10)
of
the blade holder onto the
base
(8)
3. After properly adjusting the angle (about 5°-8°), tighten the
segment arc screw (9)
to firmly fix the
assembly.
4. When installing the disposable blade, loosen the
blade lock lever (2)
, insert and push the blade
into the slot from the side, then tighten the
blade lock lever (2)
.
5. When replacing the blade, first loosen the
blade lock lever (2)
, pull up the
blade guard (6)
, push
the
ejection button (5)
to remove the blade.
5.5 Assembling the Section Waste Tray
The waste tray can be installed horizontally along the base and pushed from the outside to the inside.
5.6 Electrical connection
Insert the power plug provided in the package into the connecting jack on the rear of the instrument.
