TS-58R TPMS Diagnostic Tool
5900313 - Rev. A - March 2023
14
7. Click Clear to automatically clear the fault code and poll the ECU board to
ensure all fault codes have been deleted; or click Save to store the fault code. Saved
Fault Codes may be viewed in the “data record.”
Sensor Programming by OBD
This section covers programming the new TruSensor Tire Pressure Sensors. There
are four methods to program the Sensors: Copy by OBD, Copy by Activating, and
Automatically Create ID.
Sensor Programming - Copy by OBD (ON-BOARD DIAGNOSTIC)
This section programs New TruSensor Tire Pressure
Sensors with the Sensor ID registered on the Vehicle’s
Computer Board.
Note
: Recommended practice is to install a new
TruSensor in the same wheel, then writes the Sensor
ID to the Computer Board without performing the
Location Learning
function. This method (if available)
programs a new sensor.
To Program a New TruSensor using Copy by
OBD
:
1. After Vehicle selection is complete, select
Sensor Programming
then select
Copy by
OBD
.
