Rangemaster RMB60HPNGFSS, Руководство пользователя и инструкции по установке и обслуживанию

Страница: 19 / 32

15
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
Conversion to LP
If the appliance is to be converted to LP gas do the
conversion at this point. See the conversion section of these
instructions.
Gas Connection
Before connecting the appliance, check that it is suitable for
your gas and electricity supply. This information is on the data
label fixed to the underside of the hotplate. Gas connection
must comply with the relevant standards and regulations in
force.
The gas connection point is located towards the rear of the
hob. The inlet union is Rp ½.
The appliance must be connected to the gas supply system
with one of the following:
A rigid steel pipe
The joints of this pipe must consist of threaded fittings
conforming to the standards. The use of seals such as hemp
with suitable cement, or Teflon tape, is permitted.
A copper pipe
The joints of this pipe must consist of unions with mechanical
seals.
A flexible hose
A hose is not supplied with the hotplate. Hoses may be
purchased at most builders’ merchants.
The hose should be fitted so that both inlet and outlet
connections are vertical so that the hose hangs downwards.
The hose must be in accordance with the relevant standards.
In the UK these are:
For Natural Gas the flexible hose must be in accordance with
BS 669.
For LP Gas it should be capable of 50mbar pressure, 70°C
temperature rise and carry a red stripe, band or label.