20
Checking the Parts:
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
Note:
An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
Conversion
All models are supplied set for use on group H natural gas.
A conversion kit for LP gas is included with the appliance.
See the instructions that are supplied with the conversion
kit. After converting the appliance, please attach the Gas
Conversion sticker over the appropriate area of the data
badge – this will identify the gas type for which the appliance
is now set.
You will need the following equipment to complete the
cooker installation satisfactorily:
•
Stability bracket: If the cooker is to be supplied with gas
through a flexible hose, a stability bracket or chain must
be fitted.
These are not supplied by with the cooker but are
available at most builders’ merchants.
•
Gas pressure tester/manometer
•
Flexible gas hose: Must be in accordance with the
relevant standards.
•
Multimeter: For electrical checks
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7.
4 mm & 3 mm Allen keys
8.
Spirit level
9.
Pencil
10. Adjustable spanner
11. Screws for fitting stability bracket
Levelling tool & Allen keys
Full capacity shelf
ArtNo.000-0002 Classic tools
ArtNo.326-0013 - Full capacity shelf
(Falcon)
Grill pan tray support
2 grill pans & trivets
ArtNo.326-0004 - Cradle shelf
ArtNo.331-0008 - 90SC
grill pan & trivet
3 energy saving shelves
4 ladder side supports
ArtNo.326-0002 - Energy saving shelf
ArtNo.320-0030
90SC ladder support
Divider
Plinth
ArtNo.281-0028 - Albertine divider
ArtNo.350-0008 - 90 SC plinth
Griddle
Wok cradle
ArtNo.311-0043 - Griddle 09
ArtNo.000-0009 Wok ring, cast
