Rangemaster GLX490 RM, Инструкция по эксплуатации

Страница: 12 / 16

EN
1
12
Charcoal filter (recycling version)
This filter cannot be washed or regenerated. It must be replaced when the C appears on the
display or at least once every 4 months. The filter saturation alarm has to be activated already
before.
Activation of the alarm signal
• In the recycling version hoods the filter saturation alarm must be activated during the instal-
lation or later.
• Switch off the hood and the lights.
• Press the
E- key for about 5 seconds until the last two segments of the motor LEDS are lit on
the display.
• By releasing the E- key the clock icon starts to flash.
• Within 3 seconds press the D- key to activate/deactivate charcoal filter saturation alarm.
• C- symbol lit - charcoal filter saturation alarm ACTIVATED.
• C -symbol unlit - charcoal filter saturation alarm DEACTIVATED.
REPLACING THE CHARCOAL FILTER
Alarm reset
• Press the G-key for at least 2 seconds.
Replacing the filter
• Open the upper panel by pressing the A- key for about a second
(see Part USE).
• Remove the metal filters.
• Remove the saturated charcoal filter as indicated (
A ).
• Fit the new filters as indicated ( B ).
• Put the metal grease filters in their seats.
A
B
Lighting
LIGHT REPLACEMENT
20 W halogen light.
• Extract the lamp from the lamp holder by pulling gently.
• Replace with another of the same type, making sure that the
two pins are properly inserted in the lamp holder socket holes.