RR400 Series
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Page 5
Setting up the RR400 Series Wood Chipper
For Instructions on how to properly setup your crated RR400 Series Wood Chipper please see the RR400 Series
Wood Chipper Assembly Manual
available on the Range Road website.
1.
Operation
Proper Operation of the Firewood Processor
1.
You must familiarize yourself with the controls and features of your Wood Chipper before continuing on to
the next steps in this chapter.
2.
When operating the wood chipper, make sure you are working from the safe OPERATOR ZONE, You should
stay in this zone at all times when the wood chipper drum is in motion.
3.
Never place any of your body into a position that causes unsafe operating conditions.
4.
Always wear protective gear when operating the wood chipper.
Starting the Engine:
1)
Make sure the fuel lever is in the ON Position
(Fig.1)
2)
When engine is cold, move the choke lever to
the closed (ON) position (Fig.2)
When engine is warm, leave the choke lever in
the open (OFF) position.
3)
Move the throttle lever away from the MIN
position, slightly more than ¼ toward the MAX
position. (Fig.3)
FIG 1
FIG 2
Choke Lever
FIG 3
Fuel Lever
1/4 Throttle Position
