background image

 

RR400 Series 

Range Road Enterprises Ltd 
Box 944 
Eckville AB T0M 0X0 
www.range-road.ca

 

 

Page 16 

 

Range Road Equipment  

This equipment comes with a 12 month warranty against Manufacturer’s defects and excludes 

wear parts. If any product or part is proved to be defective within 12 months from date of 

purchase,  by reason of improper workmanship and/or material we will replace, or repair at 

Range Road Enterprises Ltd. discretion, that part or product at no charge to you, excluding any 

freight costs.

 

Items not covered: 

Wear  parts  –including  Saw  Bar,  Saw  Chain,  Drive  Sprocket,  Lovejoy  Coupling  &  Rubbers,  Ram  Cable,  Tires, 
Bearings, Belts, Etc. 
(Conveyor Belt – does not include rips or tears) 

The engine is warranted separately by the engine manufacturer

 (Honda, Lifan, Kohler, Princess 

Auto, Ducar, Etc.) 
The warranty begins on the date of sale and is warranted by Range Road Enterprises Ltd. to the original purchaser 
only.

 This Warranty does not cover items that have been damaged by accident, alteration, abuse or improper 

lubrication.

 

If the equipment is used commercially (Over 50 cords of firewood per year for processor) or a rental, warranty 
for this product is limited to a period of 90 days from the date of purchase.   
 

Warranty cancellation 

Unauthorized modification voids the warranty, Including but not limited to, welding, engine modification, pump 
and hydraulic system modification. The warranty is void if the user violates the assembly and/or operating & 
maintenance instructions.

 

Range Road Enterprises Ltd. shall not be liable under any circumstances for any incidental or consequential 
damages or expenses of any kind, including but not limited to – the cost of equipment rental, loss of profits, 
or cost of hiring services to perform tasks normally performed by the equipment. 

Range  Road  Enterprises  Ltd.  obligation  under  this  warranty  shall  be  exclusively  limited  to  repairing  or 
replacing  (at  Range  Road  Enterprises  Ltd.  discretion)  products  which  are  determined  by  Range  Road 
Enterprises  Ltd.  to  be  defective  upon  delivery  F.O.B.  (return  freight  paid  by  customer)  Range  Road 
Enterprises Ltd., and on inspection by Range Road Enterprises Ltd.. This warranty does not apply to defects 
due, directly or indirectly, to misuse, abuse, negligence, accidents, unauthorized repairs, alterations, lack of 
maintenance,  acts  of  nature,  or  items  that  would  normally  be  consumed  or  require  replacement  due  to 
normal wear.  In no event shall Range Road be liable for death, personal or property injury, or damages 
arising  from  the  use  of  its  products. Range Road Enterprises Ltd. does not issue credits or refunds on 
products purchased directly from a distributor or dealer.

 

Содержание RR400 Series

















Отзывы: