24
92)
Run processor so that ram is mostly extended and mark where the top of the silver bars pass the ram
cover (gold mark in picture)
93)
Get a piece of flat bar 3/16” or heavier about 10 ½” long, bend so at 90° so that it is 8” on one
piece and 2 ½” on the other, paint semi-gloss black
94)
Place this bar on ram cover so that it is 90° to the existing bar, position it so that when bolts are
put through it they will not hit silver bars, use the mark you made earlier to help. Use vice grips
to hold bar in place and make sure the drill bit and bolts will not hit anything.
