manualshive.com logo in svg

Rane SIXTY-TWO, Руководство оператора, Страница: 31 / 60

Поделиться
Скачать
Rane SIXTY-TWO Скачать руководство пользователя страница 31

Super Knob Mode

Super Knob Mode allows you 
individual control of each effect 
in the FX unit. Each effect slot has a Super 
Knob which controls the wet and dry 
amount for the effect.
  Click the Effects drop down box to 
select an effect for the effect slot. You can 
leave a slot empty by selecting “empty.”
  Click the 

ON

 button by the Super 

Knobs to toggle turning the effect(s) on 
and off.
  The effects chain works in series going 
from effects slots 1 to 3, meaning that the 
effected audio from slot 1 passes through 
slot 2, which is then passed through slot 
3.

Effects BPM Multiplier

The Effects BPM 
Multiplier is used 
to adjust the effect time. The effect time 
is set using the track’s BPM value, but by 
applying the Effects BPM Multiplier you 
can increase or decrease the effect time.

Deck Assign

You can select which Deck the FX unit 
applies to by clicking the 

Deck

 buttons. 

Each Deck can only pass through one FX 
unit at a time. You can assign the Sixty-
One PGM FlexFX buttons control DJ-FX: 
in the Plugins tab of the Setup screen, 
turn on 

“Enable Mixer DJ-FX Send” on 

page 45

. The software Deck buttons 

are not visible with this enabled.

Show Parameters

Press the Show Parameters 
button to expose the individual 
parameters for each effect. You can 
then control the individual parameters by 
adjusting their respective knobs. 
  In Ultra Knob Mode, use this to select 
which effects are loaded and controlled by 
the Ultra Knob. 
  In Ultra and Super Knob Mode, you 
can link or unlink a parameter to the 
Super Knob by pressing the Link Button, 
allowing one master control of some 
parameters and individual control of 
others.

Macro Edit Mode

Macro Edit Mode is an advanced 
option that allows you to create 
macro mappings for each effect and to 
save any effects edits made in Ultra or 
Super Knob Mode. Open Macro Edit 
Mode by clicking the Macro Edit Button 
while Show Parameters is open. Once 
opened, more controls appear which 
allow you to create and change parameter 
mappings.

To map a parameter to the Ultra or Super 
Knob:
1. Unlink the parameter that you 

want to map to the knob. The 
Macro Min and Max buttons for this 
parameter are now displayed.

2. Move the Ultra or Super Knob to 

the position that you want the 
parameter to start mapping from.

3. Move the Parameter Knob to the 

position that you want the to be 
the lowest value of the parameter.

4. Press the Macro Min button to set 

the minimum position.

5. Move the Ultra or Super Knob to 

the position that you want the 
parameter to end being 
controlled from.

6. Move the Parameter Knob to the 

position that you want the to be 
the highest value of the parameter.

7. Press the Macro Max button to set 

the maximum.

8. Link the parameter to the Ultra or 

Super Knob by pressing the Link 
button.

Now when you adjust the Ultra or Super 
Knob you will see the parameter knob 
move within the range that you just 
specified. Any parameters not customized 
but linked to the Super or Ultra Knob will 
behave as normal.
  You can save any macro 
mappings you have made to 
an effect by clicking the Save button 
by the Super Knob, and save effects 
combinations made in Ultra Knob Mode 
by clicking the Save button by the Ultra 
Knob.

RANE SIXTY-TWO MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4

31

Содержание SIXTY-TWO





























































Отзывы:

Нет отзывов