Basic Operation
R&S
®
ZVA-Z75, -Z90, -Z110, -Z140, -Z170, -Z220, -Z325, -Z500
20
Quick Start Guide 1307.7039.62 ─ 10
Fig. 3-1: Frequency Converter dialog (example: R&S ZVA-Z110)
3.4 Connecting the Frequency Converters
Each frequency converter must be connected to the analyzer, the power supply and
the DUT. Please refer to the following sections for details.
●
Analyzer ports:
chapter 2.4.5, "Connecting RF Cables"
,
on page 13
●
Power supply:
chapter 2.4.6, "Connecting the Converter to the DC Supply"
,
on page 15
●
DUT (usually connected after calibration):
chapter 2.4.8, "Mounting a DUT"
,
on page 16
3.5 Calibration
The R&S
ZVA-Z90 and the latest variant of the R&S
ZVA-Z110 (order number
1307.7000.0
3
) allow for a variation of the output power by changing the input power.
With these converter types the "R&S ZVA Frequency Converter Leveling Tool" can be
applied for the linearization of output power in the frequency range of interest. See
documentation "Software Utility R&S ZVA frequency converter leveling tool. Getting
Started" for further details.
With other converter models, the output power can only be manually set using the
adjusting screw. This does not allow for a power flatness calibration. A power calibra-
Connecting the Frequency Converters
