Getting Started
R&S
®
ZNL/ZNLE
51
User Manual 1178.5966.02 ─ 19
4.2.2.14
Device ID
The unique device identifier is provided as a barcode sticker on the rear panel of the
R&S
ZNL/ZNLE.
It consists of the device order number and a serial number.
The serial number is used to define the
default instrument name
, which is:
<Type><variant>-<serial_number>
For example,
ZNL3-123456
.
The instrument name is required to establish a connection to the instrument in a LAN.
4.3
Trying out the instrument
This chapter introduces the most important functions and settings of the R&S
ZNL/
ZNLE step by step. The complete description of the functionality and its usage is given
in the R&S
ZNL/ZNLE User Manual. Basic instrument operation is described in
ter 4.4, "Operating the instrument"
Prerequisites
●
The instrument is set up, connected to the mains system, and started up as descri-
bed in
Chapter 4.1, "Preparing for use"
......................................................................................51
......................................................................................... 58
......................................................................................61
Activating additional channel setups
.......................................................................62
...................................................................................... 64
Performing sequential measurements
.................................................................... 70
4.3.1
Performing measurements
This chapter takes you through a sample session with a R&S
ZNL/ZNLE network ana-
lyzer and describes basic operation tasks.
Trying out the instrument