Preparing the unit
R&S
®
ZCPS
5
User Manual 1325.6424.02 ─ 01
2
Preparing the unit
This section covers the basic steps to set up the Converter Power Supply
R&S
ZCPS and to put it into operation.
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric
shock, fire, personal injury, or damage.
●
Do not use an isolating transformer to connect the instrument to the AC
power supply.
●
Do not open the instrument casing.
●
Read and observe the "Basic Safety Instructions" delivered as a printed
brochure with the instrument or in electronic format on the documenta-
tion CD-ROM.
In addition, read and observe the safety instructions in the following sec-
tions. Notice that the data sheet may specify additional operating condi-
tions.
2.1
Unpacking the unit
The Converter Power Supply is delivered together with the accessories in a card-
board box. Proceed as follows to unpack its contents:
1. Open the cardboard box and remove the foam paddings from the top of the
box.
2. Remove the accessories (mains cable, fuses) packed into the box and take
the unit out of the packaging.
3. Remove the unit from its ESD bag.
4. Check the shipment for completeness by comparing it with the shipping docu-
ment and the accessory lists for the various items.
Unpacking the unit
