Preparing the unit
R&S
®
ZCPS
9
User Manual 1325.6424.02 ─ 01
2.4
Switching the unit On
1. Use the supplied power cable to connect the R&S
ZCPS to the AC power sup-
ply.
Fig. 2-2: Mains adapter
2. Switch the power switch to I.
The power switch has two positions:
● 0: The unit is disconnected from the AC supply.
● I: The unit is receiving power from the AC supply.
2.5
Switching the unit Off
To switch the Converter Power Supply off, proceed as follows:
1. Switch the power switch on the rear of the unit to 0.
2. Disconnect the power cable at the AC power supply.
Switching the unit On