Manual Operation
R&S
®
UPV
204
Getting Started 1146.2078.62 ─ 09
with the same name already exists in the target directory, a confirmation query
appears which the user must acknowledge before the file is overwritten.
●
Copying file:
Highlight the file and then activate the "Copy" button/softkey. Highlight the directory
to which the file is to be copied and then activate the Paste button/softkey. If a file
with the same name already exists in the target directory, a confirmation query
appears which the user must acknowledge before the file is overwritten.
●
Renaming file:
Highlight the file and then activate the "Rename" button/softkey. A window opens in
which the new file name can be entered. Enter the name and press the Enter key.
If a file with the same name already exists, a confirmation query appears which the
user must acknowledge before the file is overwritten.
●
Deleting file:
Highlight the file and then activate the "Delete" button/softkey. A confirmation query
then appears which the user must acknowledge before the file is deleted.
●
Creating a new directory:
Highlight the drive or directory level under which the new directory is to be created,
and then activate the "Create
New
Directory" button/softkey. A window opens in
which the new directory name can be entered. Enter the name and press the Enter
key.
4.15.4 Loading and Saving Instrument Settings
With the menu bar and the button "File", "Load Setup", "Load Example Setup", "Save
Setup as", "Save Setup" or "Load Display Plug-in", the "File
Select" window is called
up.
Instrument settings can also be loaded/saved directly using the LOAD / SAVE keys on
the front of the instrument. Pressing these keys opens the "File
Select" window.
Every R&S
UPV audio analyzer has a range of instrument settings which have been
prepared by Rohde & Schwarz for a broad selection of typical measurements and
which are available on the instrument as sample setups. These setups are divided into
different application areas (AA, AD, DD, DA), depending on whether generator or ana-
lyzer is operated with analog or digital interfaces, and are selected via the menu bar,
"File" and "Load Example Setup".
This allows users to make settings for their own specific measurement tasks very sim-
ply by modifying these example setups.
All of these sample settings are located in the directory D:\UPV\Setup Examples.
Every R&S
UPV also features the factory-based default instrument setting. These can
be called up directly using the File button on the menu bar or by pressing the PRESET
key on the front of the instrument.
File Management