Manual Operation
R&S
®
UPV
188
Getting Started 1146.2078.62 ─ 09
Depending on the selected softkey, the following are listed in the data list:
●
All
●
only the values which exceed the upper, lower or both limits
●
only harmonics or
●
only peaks
Cursor in lists with several individual scans
If a trace consists of several scans, only the values of one scan can be displayed in the
list at any one time. The scan number displayed in the bottom left-hand corner of the
data list in the respective display field indicates which scan is entered in the list.
In order to list individual scans, the desired scan is selected in the following way:
●
Front panel: with the SCAN keys
●
External PC keyboard: with the keys ALT + PAGE
UP and ALT + PAGE
DOWN
●
Mouse: by clicking the "Scan" field shown above
4.9 Settings in the Menu Bar
The menu bar of the audio analyzer is used in a similar way to other Windows® appli-
cations. The following settings are made in the menu bar:
File
●
Preset (Load Default)
To load instrument default settings (corresponds to the PRESET key on the front
panel, see
chapter 4.15.4, "Loading and Saving Instrument Settings"
on page 204).
A dialog box appears with the confirmation query: "Do you want to preset the
device?"
–
Yes
Preset is performed
–
No
Cancel
Settings in the Menu Bar