manualshive.com logo in svg

R&S Spectrum Rider FPH, Начало работы, Страница: 80 / 100

Поделиться
Скачать
R&S Spectrum Rider FPH Скачать руководство пользователя страница 80

Instrument Tour

R&S

®

Spectrum Rider FPH

73

Getting Started 1321.0996.02 ─ 09

The DHCP is off by default. Turn it on like this:

1. In the "Instrument Setup" dialog box, select the "DHCP" item.

2. Select "DHCP" to "On" to activate the DHCP.

The R&S Spectrum Rider is now allocated an IP address and the subnet mask by
the DHCP server. This can take several seconds.

The IP address and subnet mask are automatically set in the corresponding input
fields and are no longer available for editing.

Configure the R&S InstrumentView software with the IP address and subnet
mask as defined by the DHCP server. For more information, see 

Chapter 4.8.1,

"LAN Connection"

, 

on page 69.

4.8.2

 

USB Connection

Alternatively, you can connect the R&S Spectrum Rider to the PC with a USB
cable. The 

mini USB interface

 is located behind a protective cap on the right side

of the R&S Spectrum Rider.

When you connect the R&S Spectrum Rider to a computer for the first time, Win-
dows tries to install the new hardware automatically. The required drivers are
installed along with the R&S InstrumentView software package.

When the drivers have been found on your system and the hardware has been
successfully installed, Windows shows a corresponding message.

1. Connect the R&S Spectrum Rider via the mini USB port to your computer.

2. Start the R&S InstrumentView on the PC.

3. Select the "USB" tab in the screen layout.

Connecting the R&S Spectrum Rider to a PC

Содержание Spectrum Rider FPH





































































































Отзывы:

Нет отзывов