manualshive.com logo in svg

R&S Spectrum Rider FPH, Начало работы, Страница: 14 / 100

Поделиться
Скачать
R&S Spectrum Rider FPH Скачать руководство пользователя страница 14

Preface

R&S

®

Spectrum Rider FPH

7

Getting Started 1321.0996.02 ─ 09

1

 

Preface

1.1

 

Documentation Overview

This section provides an overview of the R&S Spectrum Rider user documenta-
tion. You find it on the product page at:

http://www.rohde-schwarz.com/manual/fph

Getting started manual

Introduces the R&S Spectrum Rider and describes how to set up and start work-
ing with the product. A printed version is included in the delivery.

User manual

The user manual contains the description of all instrument modes and functions.
It also provides an introduction to remote control, a complete description of the
remote control commands with programming examples, and information on main-
tenance, instrument interfaces and error messages.

In addition to the R&S Spectrum Rider user manual, there is a separate user
manual for the InstrumentView software package. This manual contains a
description of all features of the InstrumentView software package.

The 

online version

 (html format) of the R&S Spectrum Rider provides the com-

plete contents for immediate display on the Internet.

Service manual

Describes the performance test for checking the rated specifications, module
replacement and repair, firmware update, troubleshooting and fault elimination,
and contains mechanical drawings and spare part lists. The service manual is
available for registered users on the global Rohde

 

&

 

Schwarz information system

(GLORIS, 

https://gloris.rohde-schwarz.com

).

Basic safety instructions

Contains safety instructions, operating conditions and further important informa-
tion. The printed document is delivered with the instrument.

Documentation Overview

Содержание Spectrum Rider FPH





































































































Отзывы:

Нет отзывов