![background image](http://html1.mh-extra.com/html/rands/spectrum-rider-fph/spectrum-rider-fph_getting-started_3260730027.webp)
Preparing for Use
R&S
®
Spectrum Rider FPH
20
Getting Started 1321.0996.02 ─ 09
Risk of losing data
If a running instrument (without battery) is disconnected directly from the
power cord, the instrument loses its current settings. Furthermore, program
data may be lost.
Press [Power] key first to shut down the application properly.
The following shows the [POWER] key behavior in different operation modes.
Table 3-1: Summary of LED indication on POWER key
LED indication on [Power]
key
Descriptions
Green LED
Instrument is in operation mode.
Blue LED
Instrument is in switch off mode with a fully charged battery.
A blinking blue LED indicates that the battery charging is in
process.
Amber LED
Instrument is in switch off mode with AC supply and there is
no battery in it.
Red LED
There is an error in the battery charging.
LED "OFF"
This is an indication that there is no AC or DC supply to the
instrument. The instrument is in a switch off mode.
3.3
Checking the Supplied Options
The instrument can be equipped with different hardware and installed options. For
a list of R&S Spectrum Rider supported hardware and installed options, refer to
the instrument brochure for the list of options available.
In order to check whether the installed options correspond to the options indica-
ted in the delivery note, proceed as follows.
1. Press [SETUP] key.
2. Select "Installed Options" softkey.
A list of all available options and the current status of the options are dis-
played.
Checking the Supplied Options