R&S SMW-K553, Руководство пользователя

Страница: 36 / 44

Remote control commands
R&S
®
SMW-K553
36 User Manual 1179.4240.02 ─ 02
Parameters:
<CatalogFiles> string
Returns a string of file names separated by commas.
Example: See Example "Configuring external frontend connection set-
tings" on page 33.
Usage: Query only
Manual operation: See "Load Cable Correction S2P File" on page 26
[:SOURce<hw>]:EFRontend:ALIGnment:FILE[:SELect] <CableCorrFileNa>
Selects an existing correction file to compensate for cable losses. Selectable file have
file extension
*.s2p
.
Parameters:
<Filename> string
Example: See Example "Configuring external frontend cable correction"
on page 34.
Manual operation: See "Load Cable Correction S2P File" on page 26
[:SOURce<hw>]:EFRontend:ALIGnment[:STATe] <CableCorrState>
Activates correction of the IF signal for different IF signal frequencies.
Parameters:
<CableCorrState> 1 | ON | 0 | OFF
*RST:
0
Example: See Example "Configuring external frontend cable correction"
on page 34.
Manual operation: See "State" on page 26
[:SOURce<hw>]:EFRontend:AMODe <AttenuationMode>
Sets the attenuator mode for attenuation of the IF signal to the external frontend.
Parameters:
<AttenuationMode> AUTO | MANual
*RST:
AUTO
Example: See Example "Configuring external frontend attenuation"
on page 34.
Manual operation: See "Mode" on page 25
[:SOURce<hw>]:EFRontend:CAL:ALL
Starts all internal calibration routines to adjust the connected external frontend.
SOURce:EFRontend subsystem