R&S SMW-K553, Руководство пользователя

Страница: 26 / 44

External frontend configuration and settings
R&S
®
SMW-K553
26 User Manual 1179.4240.02 ─ 02
4.2.4 Cable correction settings
Access:
1. Select "RF A/RF B" > "RF Frontend" > "Frontend Device".
2. Select "Cable Correction".
The "Cable Correction" tab provides settings necessary to configure the frequency
response correction of the IF signal path.
You can load correction data to compensate for signal losses in the cable occurring at
different IF signal frequencies. Files containing correction data have the extension
*.s2p
.
Settings
State ..............................................................................................................................26
Load Cable Correction S2P File ....................................................................................26
Recommended Frequency Range ................................................................................ 27
State
Activates correction of the IF signal for different IF signal frequencies.
Activation requires loading of a valid cable correction file, see "Load Cable Correction
S2P File" on page 26.
Remote command:
[:SOURce<hw>]:EFRontend:ALIGnment[:STATe]
on page 36
Load Cable Correction S2P File
Accesses a standard file-select dialog to load correction data to compensate for signal
losses in the cable occurring at different IF signal frequencies.
RF frontend settings