Remote-Control Commands
Satellite Navigation
218
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:TIME:STARt:TIME
<Hour>, <Minute>, <Second>
If the time base is UTC, sets the simulation start time in UTC time format.
Parameters:
<Hour>
integer
Range:
0 to 23
<Minute>
integer
Range:
0 to 59
<Second>
float
Range:
0 to 59.999
Increment: 0.001
Example:
See
Example "Configuring the time conversion and leap sec-
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:TIME:STARt:WNUMber
<Week>
If time base is GPS or GST, sets the week number (WN).
Parameters:
<Week>
integer
The weeks are numbered starting from a reference time point
(WN_REF=0), that depends on the navigation standard.
Range:
0 to 9999*53
*RST:
0
Example:
See
Example "Configuring the time conversion and leap sec-
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:TIME:STARt:TOWeek
<TOW>
If time base is GPS or GST, sets the simulation start time within week set with the
command
[:SOURce<hw>]:BB:GNSS:TIME:STARt:WNUMber
.
Parameters:
<TOW>
float
Number of seconds since the beginning of the week
Range:
0 to 604799.999
Increment: 0.001
*RST:
0
Example:
See
Example "Configuring the time conversion and leap sec-
Manual operation:
See
Time Conversion Configuration