R&S SMJ100A, Руководство по эксплуатации

Страница: 398 / 874

Instrument Function
R&S
®
SMJ100A
382 Operating Manual 1403.7458.32 ─ 14
Trigger Delay
Sets the trigger signal delay in samples on external triggering or on internal triggering
via the second path. This enables the R&S
SMJ to be synchronized with the device
under test or other external devices.
The parameter Actual Trigger Delay displays the delay converted in time.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:DELay
on page 589
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:TDELay
on page 589
Actual Trigger Delay
Displays the time (in seconds) an external trigger event or a trigger event form the
other path is delayed by.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:RDELay?
on page 589
Trigger Inhibit
Sets the duration for inhibiting a new trigger event subsequent to triggering. The input
is to be expressed in samples.
In the "Retrigger" mode, every trigger signal causes signal generation to restart. This
restart is inhibited for the specified number of samples.
This parameter is only available on external triggering.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:INHibit
on page 589
Next Segment Trigger In
The section "Next Segment Trigger" In of the menu is only displayed if a multi segment
waveform is loaded.
The section comprises the settings necessary to adjust the trigger for the switch
between the segments of a multi segment waveform. The parameters displayed
depend on the selected trigger source.
Current Segment
Indication of the waveform segment (segment file name and index) that is currently
output.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment?
on page 618
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?
on page 626
Next Segment
Selects the waveform segment to be output next. It determines the start segment when
switching on the ARB and enables switchover to any other segment.
Baseband Signal - Baseband Block