R&S SMJ100A, Руководство по эксплуатации

Страница: 605 / 874

Remote Control Commands
R&S
®
SMJ100A
589 Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:DELay <Delay>
The command specifies the trigger delay (expressed as a number of samples) for
external triggering.
Parameters:
<Delay> float
Range:
0 to depends on other values
Increment: 0.01
*RST:
0
Default unit: sample
Example: BB:ARB:TRIG:SOUR EXT
selects an external trigger
BB:ARB:TRIG:DEL 200
sets a delay of 200 samples for the trigger.
Manual operation: See "Trigger Delay" on page 382
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:TDELay <ExtTimeDelay>
Specifies the trigger delay (in seconds) for external triggering. The value affects all
external trigger signals.
Parameters:
<ExtTimeDelay> float
Range:
0 to 688
Increment: 1E-9
*RST:
0
Manual operation: See "Trigger Delay" on page 382
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:RDELay?
Queries the time (in seconds) an external trigger event is delayed for.
Return values:
<ResTimeDelay> float
Range:
0 to 688
Increment: 250E-12
*RST:
0
Usage: Query only
Manual operation: See "Actual Trigger Delay" on page 382
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:INHibit <Inhibit>
Specifies the number of samples by which a restart is to be inhibited following a trigger
event. This command applies only in the case of external triggering.
SOURce Subsystem