R&S SMJ100A, Руководство по эксплуатации

Страница: 642 / 874

Remote Control Commands
R&S
®
SMJ100A
626 Operating Manual 1403.7458.32 ─ 14
Example: MMEM:CDIR 'D:\user\'
sets the default directory
BB:ARB:WSEG:CONF:SEL 'new'
creates the configuration file
new.inf_mswv
in the default
directory.
BB:ARB:WSEG:CONF:SEGM:APP 'arb1.wv'
'includes waveform
arb1.wv
as segment 1 in the configuration
file. The waveform must be available in the default directory.
BB:ARB:WSEG:CONF:OFIL 'multi_wv1'
defines the file name
multi_wv1.wv
for the multi segment
waveform.
BB:ARB:WSEG:CRE 'D:\user\new.inf_mswv'
creates multi segment waveform
multi_wv1.wv
using the set-
tings of the configuration file
new.inf_mswv
.
Usage: Setting only
Manual operation: See "Save List" on page 405
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?
This command queries the name of the waveform of the currently output segment of
the multi segment waveform.
Return values:
<Name> string
Example:
BB:ARB:WSEG:NAME?
queries the currently output segment.
Usage: Query only
Manual operation: See "Current Segment" on page 382
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT <Next>
Selects the segment to be output.
Parameters:
<Next> float
Range:
0 to 1023
*RST: 0
SOURce Subsystem