Remote-Control Commands
R&S
®
SMCVB-K163
57
User Manual 1179.0997.02 ─ 02
Parameters:
<Hierarchy>
A4 | A2 | A1 | NONHier
*RST:
NONHier
Example:
See
Chapter 6.1, "General Commands"
Manual operation:
See
6.2
Input Commands
................................................................................................57
........................................................................................... 63
6.2.1
General Commands
Example: Configuring general input signal properties
********************************************************************************
// Configure general input signal parameters for hierarchical coding.
********************************************************************************
:SOURce:1::BB:DVBT:HIERarchy A1
:SOURce:1:BB:DVBT:SOURce:HIGH EXT
:SOURce:1:BB:DVBT:SOURce:LOW?
// Response: TEST
:SOURce:1:BB:DVBT:INPut:HIGH?
// Response: TS
:SOURce:1:BB:DVBT:INPut:FORmat?
// Response: ASI
:SOURce:1:BB:DVBT:STUFfing:HIGH?
// Response: 1
********************************************************************************
// Configure general input signal parameters for non-hierarchical coding.
********************************************************************************
:SOURce:1:BB:DVBT:HIERarchy NONHier
:SOURce:1:BB:DVBT:SOURce:HIGH EXT
:SOURce:1:BB:DVBT:INPut:HIGH IP
// IP input requires non-hierarchical coding.
:SOURce:1:BB:DVBT:INPut:TSCHannel:HIGH 1
:SOURce:1:BB:DVBT:STUFfing:HIGH 0
[:SOURce<hw>]:BB:DVBT:SOURce:LOW
.......................................................................... 58
[:SOURce<hw>]:BB:DVBT:SOURce[:HIGH]
........................................................................ 58
[:SOURce<hw>]:BB:DVBT:INPut:LOW
............................................................................... 58
[:SOURce<hw>]:BB:DVBT:INPut[:HIGH]
.............................................................................58
[:SOURce<hw>]:BB:DVBT:INPut:FORMat:LOW
.................................................................. 58
Input Commands