R&S SMCVB-K163, Руководство пользователя

Страница: 15 / 92

DVB-T Configuration and Settings
R&S
®
SMCVB-K163
15 User Manual 1179.0997.02 ─ 02
State
Activates the standard and deactivates all the other digital standards and digital modu-
lation modes in the same path.
Remote command:
[:SOURce<hw>]:BB:DVBT:STATe
on page 55
Set To Default
Calls the default settings. The values of the main parameters are listed in the following
table.
Parameter Value
State Not affected by the "Set to Default"
Remote command:
[:SOURce<hw>]:BB:DVBT:PRESet
on page 55
Save/Recall
Accesses the "Save/Recall" dialog, that is the standard instrument function for saving
and recalling the complete dialog-related settings in a file. The provided navigation
possibilities in the dialog are self-explanatory.
The filename and the directory, in that the settings are stored, are user-definable; the
file extension is however predefined.
See also, chapter "File and Data Management" in the R&S SMCV100B user manual.
Remote command:
[:SOURce<hw>]:BB:DVBT:SETTing:CATalog?
on page 56
[:SOURce<hw>]:BB:DVBT:SETTing:DELete
on page 56
[:SOURce<hw>]:BB:DVBT:SETTing:LOAD
on page 56
[:SOURce<hw>]:BB:DVBT:SETTing:STORe
on page 56
Hierarchy
Selects the coding hierarchy.
Note: If hierarchical coding is active, some parameters require setting for high priority
(HP) and low priority (LP) input data streams. The settings are displayed separately for
both paths, but summarized in this description.
"Non Hierarchical"
Non-hierarchical coding used for one input data stream.
"Alpha 1/2/4" Hierarchical coding used for two input data streams HP and LP.
For some settings, there are two parameters: one for HP and one for
LP.
Remote command:
[:SOURce<hw>]:BB:DVBT:HIERarchy
on page 56
General Settings