Remote-Control Commands
R&S
®
SMCVB-K163
61
User Manual 1179.0997.02 ─ 02
[:SOURce<hw>]:BB:DVBT:USEFul[:RATE][:HIGH]?
.............................................................61
[:SOURce<hw>]:BB:DVBT:USEFul[:RATE]:MAX:LOW?
....................................................... 61
[:SOURce<hw>]:BB:DVBT:USEFul[:RATE]:MAX[:HIGH]?
.....................................................61
[:SOURce<hw>]:BB:DVBT[:INPut]:DATarate:LOW?
............................................................. 62
[:SOURce<hw>]:BB:DVBT[:INPut]:DATarate[:HIGH]?
...........................................................62
[:SOURce<hw>]:BB:DVBT:PACKetlength:LOW?
[:SOURce<hw>]:BB:DVBT:PACKetlength[:HIGH]?
Queries the packet length of the external transport stream in bytes.
Return values:
<PacketLengthHP>
P208 | P204 | INValid | P188
P188|P204|P208
188/204/208 byte packets specified for serial input and parallel
input.
INValid
Packet length does not match the specified length.
*RST:
INValid
Example:
See
Example "Querying input signal properties"
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:BB:DVBT:USEFul[:RATE]:LOW?
[:SOURce<hw>]:BB:DVBT:USEFul[:RATE][:HIGH]?
Displays the data rate of useful data r
useful
of the external transport stream. The data
rate is measured at the input of the installed input interface.
Return values:
<UseDRHP>
float
Range:
0 to 9999999999
Increment: 1000
*RST:
0
Example:
See
Example "Querying input signal properties"
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:BB:DVBT:USEFul[:RATE]:MAX:LOW?
[:SOURce<hw>]:BB:DVBT:USEFul[:RATE]:MAX[:HIGH]?
Displays the maximum data rate, that is derived from the current modulation parameter
settings.
The value is the optimal value at the TS input interface, that is necessary for the modu-
lator.
Input Commands