DVB-T Configuration and Settings
R&S
®
SMCVB-K163
20
User Manual 1179.0997.02 ─ 02
4.2.2
Info
Access:
► Select "Input Signal > PLP Info".
The tab displays the information on the input signal.
Chapter 5.3, "Calculating the Input Data Rate"
Settings:
................................................................................................. 21
Packet Length
Requires "Source > External".
Displays the packet length of the external transport stream in bytes.
If the packet length does not match the specified length, the output signal is erroneous.
"Packet Length > Invalid" is displayed.
"188"
188 byte packets specified for serial input and parallel input.
"204"
204 byte packets specified for serial input and parallel input.
"208"
208 byte packets specified for serial input and parallel input.
"Invalid"
Packet length
≠
188 bytes, 204 bytes or 208 bytes, i.e. the length is
not as specified.
Remote command:
Non-hierarchical coding
[:SOURce<hw>]:BB:DVBT:PACKetlength[:HIGH]?
Hierarchical coding
[:SOURce<hw>]:BB:DVBT:PACKetlength[:HIGH]?
[:SOURce<hw>]:BB:DVBT:PACKetlength:LOW?
Input Signal Settings