R&S SMCVB-K157, Руководство пользователя

Страница: 44 / 75

Remote-control commands
R&S
®
SMCVB-K157
44 User Manual 1179.4686.02 ─ 01
5.1 General commands
Example: Saving current configuration
SOURce1:BB:DVBC:SETTing:STORe "/var/user/my_dvbc"
// Saves the file "my_dvbc.dvbc" in the directory as above.
*RST
SOURce1:BB:DVBC:SETTing:CATalog?
// Response: "my_dvbc"
SOURce1:BB:DVBC:SETTing:LOAD "/var/user/my_dvbc"
SOURce1:BB:DVBC:SETTing:DELete "my_dvbc"
SOURce1:BB:DVBC:SETTing:STATe 1
[:SOURce<hw>]:BB:DVBC:STATe
......................................................................................44
[:SOURce<hw>]:BB:DVBC:PRESet
................................................................................... 44
[:SOURce<hw>]:BB:DVBC:SETTing:STORe
.......................................................................44
[:SOURce<hw>]:BB:DVBC:SETTing:LOAD
.........................................................................45
[:SOURce<hw>]:BB:DVBC:SETTing:DELete
.......................................................................45
[:SOURce<hw>]:BB:DVBC:SETTing:CATalog?
....................................................................45
[:SOURce<hw>]:BB:DVBC:STATe <State>
Enables/disables the DVB-S standard.
Parameters:
<State> 1 | ON | 0 | OFF
*RST:
0
Example: See Example "Saving current configuration" on page 44.
Manual operation: See "State" on page 10
[:SOURce<hw>]:BB:DVBC:PRESet
Sets the parameters of the digital standard to their default values (
*RST
values speci-
fied for the commands).
Not affected is the state set with the command
SOURce<hw>:BB:DVBC:STATe
.
Setting parameters:
<Preset> select
Example: See Example "Saving current configuration" on page 44.
Usage: Event
Manual operation: See "Set To Default" on page 10
[:SOURce<hw>]:BB:DVBC:SETTing:STORe <Save>
Saves the current settings into the selected file; the file extension (
*.dvbc
) is
assigned automatically.
General commands