R&S SGS100A, Начало работы

Страница: 21 / 54

Preparing for Use
R&S
®
SGS100A
19 Getting Started 1416.0570.02 ─ 11
Start the version that is required for your application.
Uninstalling an old software version
An uninstallation of a previous version of the SW can be performed before the
installation of the new one, but this is not mandatory.
► To uninstall this version, go to "Start > Settings > Control Panel > Add/
Remove Programs" and select the entry
SGMA-GUI_V.VV.VVV.VVV
.
The script file identifies and removes all currently installed R&S SGMA-GUI
software items.
2.3.2 Connecting a Remote PC via LAN
The R&S SGS is equipped with a network interface and can be connected to an
Ethernet LAN (local area network). The interface can be used, for example:
●
To connect an external computer for manual control of the instrument by the
R&S SGMA-GUI software.
●
To operate the device by a remote control program.
See
Chapter 5.2, "Network and Remote Control Operation" , on page 40.
This section describes how to configure the LAN interface. It includes the follow-
ing topics:
●
Chapter 2.3.2.1, "Connecting the Instrument to the Network" , on page 19
●
Chapter 2.3.2.2, "Assigning the IP Address" , on page 21
●
Chapter 2.3.2.3, "Automatically Adding Instruments to the SGMA-GUI " ,
on page 22
2.3.2.1 Connecting the Instrument to the Network
There are two methods to establish a LAN connection to the instrument:
●
A non-dedicated network (Ethernet) connection from the instrument to an
existing network.
●
A dedicated network connection (Point-to-point connection) between the
instrument and a single computer.
In both cases, an IP address has to be assigned to the instrument and the com-
puter, see
Chapter 2.3.2.2, "Assigning the IP Address" , on page 21.
Connecting an External PC and Devices