R&S SGS100A, Начало работы

Страница: 42 / 54

Instrument Control
R&S
®
SGS100A
40 Getting Started 1416.0570.02 ─ 11
2. Enter the first characters of the topic you are interested in. The entries starting
with these characters are displayed.
3. Press the [ENTER] key to display the help topic.
The corresponding help topic is displayed.
5.2 Network and Remote Control Operation
As an alternative to operating the R&S SGS interactively via the R&S SGMA-GUI,
one can also control the R&S SGS using programmed commands from a remote
PC.
The description in this section requires basic knowledge of the remote con-
trol operation. Definitions specified in the SCPI standard are not provided.
Nevertheless, you can find some basic information to the SCPI syntax,
command lists, and general programming recommendations in section
Remote Control Basics of the user manual. In addition, this chapter pro-
vides information on the status reporting system of the instrument.
5.2.1 Remote Control Interfaces and Protocols
The instrument supports several interfaces for remote control. The following table
gives an overview.
Table 5-1: Remote control interfaces and protocols
Interface Protocols Remarks
Local
Area Net-
work
(LAN)
●
HiSLIP High-Speed LAN Instrument Proto-
col (IVI-6.1)
●
VXI-11
●
socket communication (Raw Ethernet,
simple Telnet)
A LAN connector is located on the
rear panel of the instrument.
The interface is based on TCP/IP
and supports various protocols.
For details, see
Chapter 5.2.1.1,
"LAN Interface" , on page 41
USB USBTMC A USB connector is located on the
rear panel of the instrument.
For details, see
Chapter 5.2.1.2,
"USB Interface" , on page 45
Network and Remote Control Operation