R&S QAT100, Руководство пользователя

Страница: 7 / 44

Safety and regulatory information
R&S
®
QAT100
7 User Manual 1179.3073.02 ─ 02
●
Only connect the product to a power source with a fuse protection of maximum
20
A.
●
Ensure that you can disconnect the product from the power source at any time.
Pull the power plug to disconnect the product. The power plug must be easily
accessible. If the product is integrated into a system that does not meet these
requirements, provide an easily accessible circuit breaker at the system level.
Cleaning the product
Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind that the
casing is not waterproof. Do not use liquid cleaning agents.
Meaning of safety labels
Safety labels on the product warn against potential hazards.
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
Hot surface
Do not touch. Risk of skin burns. Risk of fire.
Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This connec-
tion protects you against electric shock if an electric problem occurs.
1.2 Labels on the product
Labels on the casing inform about:
●
Personal safety, see "Meaning of safety labels" on page 7
●
Product and environment safety, see Table 1-1
●
Device information is provided on a sticker attached to the radio (rear side). The
sticker contains a barcode and the device ID. The device ID is a combination of the
order number and the serial number.
Table 1-1: Labels regarding product and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after the prod-
uct has come to the end of its service life. For more information, see
"Disposing electrical and
electronic equipment" on page 44.
Labels on the product