Simulating radar objects
R&S
®
QAT100
27
User Manual 1179.3073.02 ─ 02
4. Screw the shielding system to the R&S
QAT using the screws from the handles
and a Torx screwdriver (4 screws, size 20).
Figure 5-9: Attaching the shielding system
When setting up the R&S
QAT with the shielding system, make sure that there is
no empty space between the shielding system and the DUT to protect other devi-
ces from interfering radar signals.
d
2
d
1
Figure 5-10: Distance between shielding system and DUT
d
1
= Position OK: DUT directly in front of shielding system
d
2
= Position not OK: DUT too far from shielding system
