Operation
R&S
®
HA-Z900 / -Z1900
7
Technical Information 1328.6490.02 ─ 01
Connectors
The Yagi antennas have an RF connector in their handles. The female RF connector
with an impedance of 50
Ω
allows you to connect the antenna to a spectrum analyzer
with an appropriate cable.
Risk of damage to the antenna
Make sure not to overload the RF input and keep within the maximum allowed signal
levels.
See
Chapter 1, "Specifications R&S
®
HA-Z900"
,
on page 4 and
Chapter 2, "Specifica-
tions R&S
®
HA-Z1900"
,
on page 5 for details.
Recommended measurement equipment
Using the antenna requires an RF cable to connect it to a signal and spectrum ana-
lyzer.
Recommended cables:
●
R&S
®
HA-Z901 RF Cable (3626.2757.02)
Recommended spectrum analyzers:
●
R&S
®
Spectrum Rider FPH
●
R&S
®
FSH
●
R&S
®
ZVH
Other equipment:
●
R&S
®
HA-Z901 Carrying Bag (1328.6883.02)
Measurement setup
1. Connect one end of the RF cable to the RF input (a female N connector) of the
antenna.
The RF input is integrated into the handle of the antenna.
2. Connect the other end of the cable to the RF input of the R&S
®
Spectrum Rider
FPH.
