MSRA configuration
R&S
®
FSWP-B1
53
User Manual 1177.5862.02 ─ 09
However, the window length may not be longer than the
.
Remote command:
Capture Offset
This setting is only available for secondary applications in
MSRA operating mode
. It
has a similar effect as the trigger offset in other measurements: it defines the time off-
set between the capture buffer start and the start of the extracted secondary applica-
tion data.
In MSRA mode, the offset must be a positive value, as the capture buffer starts at the
trigger time = 0.
For more information, see
"Trigger offset vs. capture offset"
Remote command:
6.6.2
Sweep settings
Access
: "Overview" > "Bandwidth" > "Sweep" tab
or
: [SWEEP]
For background information on performing sweeps in MSRA mode see
.................................................................................... 54
........................................................................................ 55
.................................................................................................55
Data acquisition and bandwidth settings