Preparing for Use
R&S
®
FSVA3000/R&S
®
FSV3000
18
Getting Started 1330.8073.02 ─ 04
4.4.1
Placing the R&S
FSV/A on a Bench Top
To place the product on a bench top
1. Place the product on a stable, flat and level surface. Ensure that the surface
can support the weight of the product. For information on the weight, see the
data sheet.
2.
CAUTION!
Foldable feet can collapse. See
on page 8.
Always fold the feet completely in or out. With folded-out feet, do not place
anything on top or underneath the product.
3.
WARNING!
A stack of products can fall over and cause injury. Never stack
more than three products on top of each other. Instead, mount them in a rack.
Stack as follows:
● It is best if all products have the same dimensions (width and length).
● The overall load on the lowest product must not exceed 500
N.
● With smaller products on top of the lowest product, the overall load on the
lowest product must not exceed 250
N.
Too many instruments
max. 500 N
Correct
Different dimensions
max. 250 N
4.
NOTICE!
Overheating can damage the product.
Prevent overheating as follows:
● Keep a minimum distance of 10
cm between the fan openings of the prod-
uct and any object in the vicinity.
● Do not place the product next to heat-generating equipment such as radia-
tors or other products.
Setting Up the R&S
FSV/A
