Remote Commands to Perform Measurements with I/Q Data
R&S
®
FSV/A3000 I/Q
Analyzer
238
User Manual 1178.8536.02 ─ 01
CALCulate<n>:MARKer<m>:LOEXclude
<State>
This command turns the suppression of the local oscillator during automatic marker
positioning on and off (for
all
markers in
all
windows).
Suffix:
<n>
.
irrelevant
<m>
irrelevant
Parameters:
<State>
ON | OFF | 0 | 1
*RST:
1
Example:
CALC:MARK:LOEX ON
Manual operation:
See
CALCulate<n>:MARKer<m>:PEXCursion
<Excursion>
This command defines the peak excursion (for
all
markers in
all
windows).
The peak excursion sets the requirements for a peak to be detected during a peak
search.
The unit depends on the measurement.
Application/Result display
Unit
Spectrum
dB
Suffix:
<n>
.
irrelevant
<m>
irrelevant
Example:
CALC:MARK:PEXC 10dB
Defines peak excursion as 10 dB.
Manual operation:
See
CALCulate<n>:MARKer<m>:SEARch
<MarkRealImag>
This command selects the trace type a marker search is performed on.
Suffix:
<n>
.
irrelevant
<m>
irrelevant
Parameters:
<MarkRealImag>
REAL
Marker search functions are performed on the real trace of the
"I/Q" measurement.
I/Q Analysis