R&S FSV-K8, Руководство по эксплуатации

Страница: 20 / 135

Instrument Functions for Bluetooth Measurements (K8)
R&S
®
FSV-K8
20 Operating Manual 1176.7610.02 ─ 02
3 Instrument Functions for Bluetooth Meas-
urements (K8)
This option provides measurements to test the conformity of signal sources to the
Bluetooth RF Test Specification (Bluetooth SIG).
For background information on Bluetooth measurements refer to chapter 2, "Introduc-
tion to Bluetooth Measurements (K8)" , on page 10.
To open the Bluetooth menu
●
If the "Bluetooth" mode is not the active measurement mode, press the MODE key
and activate the "Bluetooth" option.
If the "Bluetooth" mode is already active, press the MENU key.
The "Bluetooth" menu is displayed.
Menu and softkey description
The following softkey menus are specific to the R&S FSV-K8 option and are described
here:
●
chapter 3.3, "Softkeys of the Bluetooth Menu" , on page 34
●
chapter 3.4, "Softkeys of the MEAS CONFIG menu" , on page 49
●
chapter 3.7, "Softkeys of the Frequency Menu (option R&S FSV-K8)" , on page 55
●
chapter 3.5, "Softkeys of the Amplitude Menu (Bluetooth Mode)" , on page 49
●
chapter 3.6, "Softkeys of the Bandwidth Menu (option R&S FSV-K8)" , on page 53
●
chapter 3.8, "Softkeys of the Sweep Menu (Bluetooth mode)" , on page 56
●
chapter 3.9, "Softkeys of the Trigger Menu (Option R&S FSV-K8)" , on page 60
The span menu is not available in the "Bluetooth" mode. All other menus are provided
as described for the base unit. For details refer to the corresponding menu descrip-
tions.
To display help to a softkey, press the HELP key and then the softkey for which you
want to display help. To close the help window, press the ESC key. For further infor-
mation refer to
chapter 1.3, "How to Use the Help System" , on page 8.
Tasks
●
chapter 3.2, "Adapting the settings to the characteristics of the DUT" , on page 33
Measurement settings
Various measurement types are available with the Bluetooth option, see chapter 3.1,
"Measurement Types and Result Display" , on page 22.
The basic parameter settings are described in chapter 3.2, "Adapting the settings to
the characteristics of the DUT" , on page 33. The settings that can be configured indi-
vidually for each measurement are the following: