R&S FSV-K8, Руководство по эксплуатации, Страница: 49 / 135

Instrument Functions for Bluetooth Measurements (K8)
R&S
®
FSV-K8
49 Operating Manual 1176.7610.02 ─ 02
3.4 Softkeys of the MEAS CONFIG menu
The MEAS CONFIG key provides direct access to the submenu of the currently
selected measurement type. For a description of the submenus, see the corresponding
keys in
chapter 3.3, "Softkeys of the Bluetooth Menu" , on page 34.
3.5 Softkeys of the Amplitude Menu (Bluetooth Mode)
The following table shows all softkeys available in the amplitude menu in Bluetooth
mode (AMPT key). It is possible that your instrument configuration does not provide all
softkeys. If a softkey is only available with a special option, model or (measurement)
mode, this information is delivered in the corresponding softkey description.
Ref Level
Opens an edit dialog box to enter the reference level in the current unit (dBm, dBµV,
etc).
The reference level is the maximum value the AD converter can handle without distor-
tion of the measured value. Signal levels above this value will not be measured cor-
rectly, which is indicated by the "IFOVL" status display.
Remote command:
DISPlay[:
​
WINDow<n>]:
​
TRACe<t>:
​
Y[:
​
SCALe]:
​
RLEVel
​
on page 107
Range Log Manual
Opens an edit dialog box to define the display range of a logarithmic level axis man-
ually.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG
, see
DISPlay[:
​
WINDow<n>]:
​
TRACe<t>:
​
Y:
​
SPACing
​
on page 108
Not available for Carr Freq Drift, Init Carr Freq Tol, and Modulation Char measure-
ments.
Display range:
DISPlay[:
​
WINDow<n>]:
​
TRACe<t>:
​
Y[:
​
SCALe]
​
on page 105
Range
Opens a submenu to define the display range of the level axis.
Softkeys of the MEAS CONFIG menu